Planer Thicknesser - Scheppach HM2 combi + tfe30 spindle moulder attachment. This is the sought after German woodworking machine with Sheppachs spindle moulder addition that sits on proprietary connection points to the side of the body. Planer is heavy duty steel construction and alone weights around 95kg. Planing bed capacity 260mm wide and will plane up to 3mm from a fraction of a millimetre. Thicknesser fully adjustable up to 140mm height with 250mm wide capacity and ability to cut up to 5mm in one pass.
Single phase 240v powerful motor. Cutter block is fitted with adjustable blade holders to take re-sharpenable blades using fine height adjuster setting screws. Heavy duty fence is adjustable 45-90 degrees to take various width timber stock and undertake bevelled planing finishing. Safety blade guard is included.Chip removal hood allows extraction of dust and wood waste in either planer/thicknesser mode and has 100mm diameter connection outlet. A spare cutter block drive belt is included along with table extension roller pieces to allow longer stock to be planed.
2no spare blades included which are sharp. The blades fitted to the machine will require re-sharpening and setting. Scheppach tfe30 Spindle Moulder - Table is 615mm(l) x 450mm (w) x 590mm (h). Spindle speed can be adjusted between 3000 or 6500 rpm via easy pulley/belt changeover.
Spindle diameter 30mm to take a wide range of standard tooling. Original cutter guard, table support leg & 27mm spindle nut spanner are all included in the sale.The feed & safety hold-down wheel unit is a top quality item by Felder. The aluminium fence has quick and micro-adjustment and spindle has 60mm of travel height and can take cutter block tooling of up to 200mm maximum diameter. There are various spindle spacers including 5mm (x2) 10mm (x1) 15mm (x2) 30mm (x1) 40mm top hat, spindle safety ring and 30mm lock nut. There is a 100mm diameter outlet to connect extraction hose off the back of the hood. All original parts included in the sale & are shown in the photographs and included in this description. While the condition of the machine is Used the excellent condition of all the kit cannot be over emphasised. The equipment has been well looked after and used for light DIY use with regular servicing and maintenance. Recent clean, strip down and lubrication of relevant parts.
The spindle moulder has hardly been used and retails alone for over 1000 in Europe. There is a significant amount of extra kit included in the sale, all of which are original Scheppach accessories. As might be expected there are some scratches to the paint finishes, paint splashes and other surface marks all of which might be expected. The planer comes fitted on a purpose made mobile base with heavy duty casters and has extending threaded rods that can be set to provide a stable working arrangement.
Answers to a number of queries raised. Motor is manufactured by AEG & is 2750 rpm, rated at 9 amp. Spindle moulder is marked as manufactured in 2000. Spindle moulder is connected to the cutter block shaft via a bespoke belt that sits in the spindle housing to run the spindle operation and is accessed through either of the two circular access doors located in the underside of the table within the triangular section, you can see these on the photos. Regards the weight/size of items I can confirm that it can easily be moved in a standard hatchback or estate type car.
I have moved everything in a VW Golf. The item "Planer Thicknesser Scheppach HM2 combi + tfe30 spindle moulder attachment" is in sale since Sunday, January 10, 2021.
This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Planers". The seller is "jc1968-27oct" and is located in York. This item can't be shipped, the buyer must pick up the item.