Axminster Trade Series BS648 Belt Sander 230v (Used). This sander is originally an ex-shop display model, which has subsequently been used to demo in our skill centre. The sander has not had much use and is fully working. It will come supplied as shown, with signs of use and cosmetic marks/scratches present. (nothing of which is detrimental to the working or general appearance of the machine).
Sturdy and robust, fabricated from heavy gauge steel plate and cast iron. Can be used in any position from horizontal to vertical.Fitted with comprehensive guarding system. Supplied with a high quality Hermes 150 x 1,220mm abrasive belt (which has been used). Large cast iron sanding table, tiltable from -15° to +45°. Two 62mm dust outlets will give exceptional extraction. A sturdy and robust machine, fabricated from heavy gauge steel plate and cast iron components.
Versatile, because the belt arm can be used in any position from horizontal to vertical. The whole belt arm pivots around a very large flange with a graduated scale and the outer end of the belt drive roller is supported in its own ball bearing assembly.
Fitted with a very comprehensive guarding system that allows the operator to expose only the amount of sanding belt required, but still allowing very easy changes of the belts. This machine has a large cast iron sanding table, which tilts from minus 15° to plus 45° and gives great support.
When used as a linisher in the horizontal mode, the guarding can be removed to expose the maximum amount of belt and a fixed work stop is provided. The close fitting guarding coupled with two 62mm dust outlets will give exceptional extraction when attached to a suitable fine dust collector.Uses standard 150 x 1,220mm abrasive belts. 150 mm x 1,220 mm. Overall L x W x H. 500 mm x 550 mm x 790 mm. Sound Power Level [Uncertainty K].
79 dB(A) [1.5 dB]. 310 mm x 160 mm.Please be aware that this product is to be delivered by Axminster Transport. This is a bespoke service for the UK mainland only, including off-loading and assistance where practical.
Please note that we only organise one Scottish "HG Run" per month and will aim to deliver the goods as soon as possible. Please be advised any destinations "North of Edinburgh" will incur extra charges, which will be advised at the time of placing the order. Due to logistics restraints and the size/packed nature of the goods, we are unable to deliver any of our "Heavy Goods" SP listings, to postcodes situated within the Scottish Highlands. Should you encounter any problems. (Faulty, Damaged, Incorrect Item Received or Not as Described).By clicking on the "ask a question" link near the bottom of the listing (you may be asked to sign in) and we can action the enquiry accordingly. If the item is damaged in transit, please advise within 7 days of receipt.
I'm Missing Parts Which State They Should Be There... And we can arrange for the parts to be sent on accordingly. If I Change My Mind... You then have "30 Days", in which to return the product, providing it is complete with all of the component parts included, unused in the original packaging and in the same condition as received. Transport packaging should be sufficient for the method of carriage.
We cannot accept any responsibility for damage caused by your carrier. Typically we will arrange a repair for the product or replacement parts, subject to each individual instance.
We will endeavor to rectify any issues you may have with your item/s or if there are any discrepancies with the description, in relation to the item/s received. The item "Axminster Trade Series BS648 Belt Sander 230v (Used)" is in sale since Thursday, May 31, 2018.
This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Sanders". The seller is "axminsteroutletstore" and is located in Axminster. This item can be shipped to United Kingdom.